Most materials cannot be handled by a sewer line. Toilet paper should be the sole object flushed besides organic waste.

However, there are situations when toilet paper blocks septic tanks or the sewage system. You might be wondering how to dissolve toilet paper if you have a hard blockage in your sewer lines.

Most of the time, using chemical additives to break down toilet paper is not essential. To remove obstinate toilet paper, use a plunger or an auger, both of which are common home items.

There are further natural solutions for clearing toilet paper clogs.
A TOILET PAPER CLOGGED SEWER LINE: CAUSES

Condoms and baby wipes shouldn’t be flushed down the toilet since they don’t break down correctly. Baby wipes, including flushable ones, shouldn’t be flushed.
Did you realize that paper towels share the same characteristics? They cannot be used in place of toilet paper.
But using just toilet paper might occasionally choke sewer lines. The most frequent causes are:
1. ADDITIONAL TOILETY PAPER Has too much toilet paper been flushed at once? That’s the reason behind this kind of obstruction virtually often.

When toilet paper travels through your pipes, it can stretch and twist back on itself. If too much is flushed at once, it may ball up and become lodged in the piping.

Sometimes a chunk will get stuck, which will lead to waste becoming snagged and clogging the pipe.
The knowledge that toilet paper can dissolve on its own may provide you some relief. Sometimes all the materials require is time to degrade.
But occasionally the obstruction is too great for that.

Try flushing little, broken-up bundles of toilet paper rather than large amounts at once. The substances in your toilet bowl dissolve more readily as a result.

(2) CURRENT PARTIAL CLOG When you don’t flush a lot of toilet paper at once, blockages are uncommonly caused by toilet paper alone. However, the paper may get tangled up with other garbage that is partially filling your toilet.

This may cause the pipes to completely become blocked.
In these circumstances, the toilet typically drains quite slowly. After an hour or so, the toilet may flush more readily if the paper dissolves.
TEARING UP TOILET PAPER

Most of the time, you can solve the problem on your own without calling a plumber. You can use natural cures in addition to toilet cleaners like Rid-X, which are sold on Amazon.

The top six methods for clearing a toilet paper clog are as follows.
Utilize EPSOM salts. Epsom salts are frequently dissolved in bathwater to help with muscle relaxation. However, they are typically present in toilet cleansers as well.
The salts dissolve garbage after breaking it down and are considerably kinder than bleach.
This method’s steps are as follows:

One cup of Epsom salts should be added to the toilet bowl. After it, pour a gallon of boiling water down. However, avoid using hot water as it may damage your property. Let the salt sink into your drain on its own. After 30 minutes, return. Pour a gallon of hot water and another cup of salt. Get rid of all the dissolved materials by flushing the toilet. Just remember that you don’t want to trigger an overflow in your toilet. Don’t add another gallon of water if the salts don’t seem to be working after the first one.

2. APPLY CHEMISTRY CLEANERS. You could try using chemical cleaners if you don’t want to utilize a home solution. Cleaning products vary in their effectiveness.
Make sure the cleaner you choose has been approved for use in toilets.
Rid-X is a wise choice. Toilet paper, grease, and organic waste can all be broken down by this substance.
It only requires that you pour it in and flush. Within a few minutes, everything is typically broken down.
Put another round of Rid-X down the drain if the water is still draining slowly. It breaks down debris effectively and won’t harm your pipes.
PUT DISH SOAP TO USE. Your kitchen or bathroom sink can contain the answer to your issue. Dish soap will work in some cases.

Although some garbage can be broken down, that’s not the point. The intention is to make the waste slick so that it won’t adhere to the pipes.

It can now slide down the drain as a result.
Take these actions:

Clean out the toilet bowl and tank while soaking up any leftovers with a sponge. Around the rim of the toilet, squirt a generous amount of dish soap. Ladder the soap into the pipes as it falls. In the drain, pour a gallon of hot water. To get the soap out of the toilet, flush it. This should aid in the clog’s removal.

4. MIX VINEGAR AND BAKING SODA. When you want to clean the bathroom, baking soda and vinegar work great together. Mix 1/4 cup vinegar and 1/4 cup baking soda into one liter of water.

Pour the mixture into the bowl of the toilet and let it drain. You can increase the amount of vinegar and baking soda if necessary.

As long as the obstruction is organic in nature, the bubbles should dissolve it. Just bear in mind that non-organic materials like sanitary napkins, paper towels, or q-tips won’t dissolve clogs generated by this technique.

5. USE A PLUNGER IN THE TOILET. If using a toilet plunger doesn’t work, try the options listed above first. Then make one more attempt to clear the obstruction.

I’m hoping it’ll be slick and enough dissolved to move.

Simply place your plunger over the drain and slowly raise and lower it. This will generate a tremendous amount of internal suction, which should pull on the obstruction until it is removed.

When the obstruction is removed, you should hear a gurgling sound. Plunging normally works and should just take a few minutes.

6. APPLY A TOILET AUGER. You might need to utilize a closet auger if you’ve tried all other options without success. Because of the way it winds through the pipes, this device is also known as a toilet snake.

A corkscrew at the auger’s tip is intended to hook on trash and pierce obstructions. When you feel it catching on the obstruction, crank the end into the drain.

Push onward till it breaks through.
The auger can then be turned to remove the obstruction. After that, flush the toilet and remove the drain snake.
Before putting the auger away, make sure you thoroughly clean it. It frequently still has some adhering detritus.
Bacteria may grow if you don’t clean it thoroughly enough.

LAST THOUGHTS There may be too much toilet paper in the pipes at times, which might block them. Dealing with this problem can be frustrating, especially if basic plunging doesn’t work.

Sometimes all you need to do is wait. Similar to biological waste, toilet paper decomposes in water.
The clog may clear itself.

In other circumstances, you can break down the waste with tools like Epsom salts and cleansers. Dish soap can also be used to dissolve the clog.

You might need to hire a plumber if you try all of these solutions and the clog still persists. It’s possible that the issue has nothing to do with toilet paper.

A plumber can identify the problem and resolve it if there is another factor that may be contributing to the clog.