The good news is that you can frequently DIY a fix before you need to call a plumber. However, if you’ve attempted to clear a clog and enhance the water flow but haven’t had any luck, you could need a professional’s assistance.

The following are the most typical causes of this flushing issue:
1. CHECK THE LEVEL OF YOUR WATER Low water pressure won’t be sufficient to flush the toilet bowl, which can cause obstructions.
Fill the tank to a depth of 1/2 inch under the overflow tube. The flapper valve shouldn’t open until the tank is almost full.
Adjust the position of the metal arm attached if it employs a float cup.

check for clogs

If the obstruction is not cleared, solid waste may linger at the bottom of the toilet.
Just fill the bowl with a gallon of water. Does the water level rise swiftly?

When you are aware of a clog, a plunger can generally clear it. But you might need to use a toilet snake if your plunger isn’t working.

Another approach is to flush the pipes with hot water. Sometimes, doing this will clear light soap scum clogs.
3. VERIFY ANY MINERAL BUILDUP You inquire, “Where is this calcium?” It has accumulated in the air openings surrounding your toilet seat.
Your toilet’s power is reduced as a result.

LAST THOUGHTS But it’s a good idea to call a plumber if you’ve tried these three troubleshooting techniques without result. They’ll be able to locate the problem’s origin and resolve it.





Enter your email address below to

subscribe to my newsletter