You may be asking how to sand drywall without dust if you’ve ever finished drywall because you are surely aware of the mess that is made throughout the sanding process.

And the response? Wet-sand.

Wet sanding can significantly minimize the amount of drywall dust left on the walls, floors, and in the air, despite the fact that it is a laborious operation.

Here’s a method for wet sanding drywall to reduce dust.
WET-SANDING: What Is It?

Drywall is traditionally finished by adding drywall mud or joint compound and taping the panel joints. To achieve a smooth surface, the dried mud is sanded with sandpaper.

But other people prefer to wet sand it because dry sanding creates so much dust.

A firm, damp sponge is used during wet sanding to remove and smooth out extra drywall compound. The joint compound is feathered out and drywall dust is effectively avoided by wet sanding.

WHAT ARE WET SANDING DRYWALL’S PROS AND CONS? Wet sanding has a few limitations even if it’s a great approach to reduce dust.

Wet sanding feels less smooth to the touch than dry sanding. However, damp sanding can produce a better-looking finish than regular drywall sanding because the water from the sponge softens the edges of the joint compound.

The additional time required for wet sanding is another major disadvantage. It may still be more advantageous if you include in the time you’ll save not having to clean up after yourself.

WET SANDING ADVANTAGES: Significantly less drywall dust Seams are less noticeable when drywall mud has been feathered out. Inexpensive Drawbacks to wet sanding Time-consuming Uneven compared to dry sanding Accidental overwetting can damage the paper face of the drywall. ACCESSORIES REQUIRED WET SAND DRYWALL

Water, Sanding Sponge, Bucket Although you may technically sand drywall with any stiff sponge, it’s recommended to invest in a drywall sanding sponge. (You should utilize this wet drywall sanding sponge from Amazon because it has a high rating and is a fantastic example.)

STEPS ON HOW TO WET SAND DRYWALL DAMPEN YOUR SPONGE IN STEP 1 Wring out your drywall sponge after dipping it in water to get started. Your sponge shouldn’t be drenched in water, but it should feel damp.

Start with the abrasive side in step two. Start by using the abrasive side of your sponge to remove any high or spiky areas of the drywall mud.

Lightly press over the mud in circular strokes. Avoid pressing too hard or being in one place for too long. As needed, rinse your sponge.

FEATHER OUT THE COMPOUND IN STEP 3 Your sponge should now be properly rinsed and re-dampened. After that, smooth and feather the edges of the drywall joints by rubbing the smooth side over the joint compound.

Since this is the final pass, concentrate on reducing the bump and blending the edges. Apply uniform gentle pressure throughout.

LET IT DRY AND RE-INSPECT IN STEP 4 You must now wait for the wall to dry. Any further wet sanding attempts will be too much for the paper face of the drywall.

Once the wall has dried, look for any inconsistencies or rough areas. You must sand any rough areas with a standard drywall sander if there are any.

LAST THOUGHTS Wet sanding is something to consider if you want to significantly reduce the amount of drywall dust. Although wet sanding takes a lot of time, it might still be faster than dry sanding because there is less cleanup to do afterwards.

Take your time to accomplish the task properly if you’re going to wet sand. Keep your sponge from being too moist, and rinse it as soon as a buildup of joint compound appears.

Ensure that you routinely rinse your water bucket as well.