If The Faucet Has A Button Or Cap Locate andamp; Remove The Button Or Cap Shut Off The Water andamp; Cover The Drain Remove The Screw andamp; Handle Double Faucet Handles Lever-Style, Single Handle Faucets Final Thoughts On Removing A Faucet Handle Without Screws Nowadays, the majority of kitchen and bathroom faucet handles lack any visible screws. Although it can make it more difficult to remove the faucet knobs when necessary, this makes the faucet look elegant and sleek.

You might need to remove a faucet handle for a variety of reasons, such as to replace it, to replace the faucet cartridge, to replace an o-ring or gasket, to clean the handle’s interior, to find and fix a leak, and to change the filter.

This post will help you learn how to remove a faucet handle for any reason, saving you the expense of hiring a plumber. We’ve listed three distinct techniques below because not all faucet knobs can be removed in the same way.

A BUTTON OR CAP IF THE FAUCET HAS ONE

LOCATING ANDAMP; REMOVING THE CAP OR BUTTON Many faucets only genuinely lack screws when a decorative cap or button is used to cover them. See if you can find one on the handle’s top or side.

If you come across one, you can take it out with a flathead screwdriver. Work it around the button or cap by simply working it into the space between them while gently lifting as you go.

While doing this, exercise extreme caution because it’s frequently easy to break the caps and buttons. If it does occur, you can usually purchase a replacement, but who wants to deal with the hassle?

COVER THE DRAIN AND TURN OFF THE WATER You should use the shut-off valve to stop the flow of water if you plan to replace the cartridge. Otherwise, you are not required.

Cover the drain regardless of why you are removing the handle. A loose screw can easily slip into a drain, but it is more difficult to retrieve it.

THE SCREW ANDAMP; HANDLE MUST BE REMOVED Simply remove the handle screw now that it is visible. Make sure you use the proper size and kind of wrench because it likely has an allen or hex screw.

You may simply raise the faucet handle up to remove it after the screw has been removed. You might need to use a set of pliers or a faucet handle puller if doing it with your own hands is too difficult.

Use an old towel or rag between the pliers and the handle to protect the finish of your faucets as pliers can harm it.

If the handle was challenging to remove, you might find corrosion or mineral deposits underneath. It’s a good idea to go ahead and clean things up with white vinegar or a specially formulated cleaning product like CLR Calcium, Lime, and Rust Remover .

By doing this, you will make future removal simpler and safeguard your faucet from leaks and damage.
Simply reinsert the parts in the opposite sequence from how you removed them to reassemble the faucet.

– DOUBLE FAUCET HANDLES
A double handle faucet’s handles can be taken off quite easily.
Start by turning off the water, ensuring sure that each supply line is stopped off.
Hold the handle in place after that. Rotate the base in the other direction at the same time.

This ought to enable you to take it off, revealing the screw. You’ll need the proper size of Phillips head screwdriver to remove it since it often has a Phillips head screw.

The screw can be removed to reveal the cartridge. You’ll need to grab it and raise it with needle-nosed pliers if you need to remove it, say to install a new cartridge.

Although it can be a little more difficult, there isn’t actually a more simple approach. You might be able to get assistance from your faucet’s manufacturer if you run into problems.

SINGLE HANDLE, LEVER-STYLE FAUCETS

For faucets with a single lever handle, the third procedure is used to remove the handle.
These faucets often contain buttons for cold and hot water. Lift the buttons slowly using a flat head screwdriver.

Use a delicate hand because these can be fragile once again. To prevent losing a button down the drain, be sure to cover the drain as well.

The set screw will become visible once the button has been removed. To remove it, use an allen wrench (also known as an allen key).
The faucet handle may usually be removed by simply lifting it off after you’ve done that.

But to be able to remove the cartridge, you might also need to unscrew a top piece if it has one inside. You might require pliers to grasp and raise the cartridge in order to remove it.

To avoid damaging the cartridge, place a cloth in between it and the pliers.
Now that the cartridge has been removed, you can see inside the spout body if one is missing.
A FAUCET HANDLE Removal Final Thoughts without Screws

Now that you know how to do it, even if you can’t see a screw, you can easily remove the handle from a kitchen or bathroom sink faucet, as well as many bathtub and shower faucets. With this knowledge, you should be able to perform many plumbing-related home maintenance and improvement tasks yourself, saving you money and the hassle of hiring a plumber for quick solutions.

You should be able to use these instructions with faucets from well-known brands like Moen, Kohler, Delta, and others.

They might not function with all faucets, though. However, if you continue to struggle, you can get assistance from the customer service team at the manufacturer of your faucets.