What Can Cause A Bathtub Not To Drain? Built Drain Stopper Is Stuck The Drain Is Clogged With Hair The Drain Has Hard Water Build Up Soap Scum Build Up Dirt and Grease Buildup Clogged With Larger Objects Septic Backup Common Ways To Unclog The Drain What Can Cause A Bathtub Not To Drain? 0 What Can Cause A Bathtub Not To Drain? 1 Nothing is more unpleasant than having icky water collect around your ankles as you wash. If the water in your bathtub won’t drain, there may be a variety of issues.

The majority can be resolved with common household items and cures, but some may call for professional assistance.
WHAT CAN PREVENT A BATHTUB FROM DRAINING? STUCK BUILT DRAIN STOPPER

Most bathtubs are constructed with a stopper. For bathing, this mechanism prevents the water from draining.
Various types come with various stoppers. Yours might be a knob that you spin, pop up, lift and turn, or use a lever.
Stoppers are designed to operate with a simple switch or knob turn. However, the bathtub might not drain properly if they become jammed.
Instead of stagnation, there may be delayed drainage if they are just partially blocked.

If a stopper is old, corroded, or damaged, it is more prone to get stuck. The stopper may be to blame if your bathtub is an older type with all of its original components.

Using pliers, the plug from the drain may be removed. Examine the mechanism to check whether it has been worn out or clogged with hair.
It must be replaced if it is damaged.

HAIR IS OBSTRUCTING THE DRAIN

.

You lose hair when taking a shower. It comes naturally as you wash and condition your hair.

Some of them will come out when you work the soap through the threads. Hair clumps could be sliding down the pipe or lying on top of your drain.

A few hairs down the drain usually don’t cause too much trouble. However, hair can accumulate over time and clog the pipe.
This is true particularly if the hairball acts as a net to collect dirt and muck.

You might try unscrewing the hole if you think hair is plugging the drain. Remove any hair or dirt from the pipe by pulling it up, and then carefully screw it back together.

Just be careful when you’re doing it. The hair could be pushed farther into the pipe if you move in the wrong direction.

HARD WATER HAS BUILT UP IN THE DRAIN Mineral-rich water is referred to as “hard water.” Although the presence of calcium or magnesium in your water supply is not inherently harmful, these substances can cause serious damage to your pipes.

Over time, the water leaves behind microscopic mineral deposits, which accumulate to the point where they obstruct the pipes.

A clog can occasionally be caused by both buildup of hard water and debris. For instance, the calcium deposits may cause the internal margins of a pipe to become jagged.

Then, on those jagged edges, hair and soap tangle and form a net that catches debris, quickly resulting in a full clog.

Hard mineral deposits can seriously harm your pipes by wearing them out. If this is the cause of the clog, replacing the pipes might be preferable to trying to get rid of the minerals.

Test the pH of your water to see if there are any heavy minerals to stop this from occuring.

: SOAP SCUM BUILD UP
You might not consider soap scum to be a potential clog-causing factor. The residue from soapy shower items is what this substance is made of.

But soap scum is made of soap mixed with water that is high in minerals. It might accumulate gradually until it slows or stops your outflow entirely.

The dangers of soap scum go beyond just that. Mold and mildew are also drawn to the substance.

It might be a haven for bacteria when it’s present in your pipes. For the water that circulates through your plumbing system, that is terrible news.

Your best bet with soap scum is to avoid clogs, just like with hard water. You can test the pH of your water in addition to using a mesh filter to stop the debris from slipping down the drain.

A solution of water and baking soda, followed by boiling water, can clear some soap scum clogs. These combinations should be poured down the drain.
BUILDUP OF DUST AND GREASE

Grease and dirt buildup can result in clogs. Although we frequently associate fat with food, it can also be a soap residue.

Grease’s problem is that it freezes when it gets cold, which occurs when it penetrates a significant portion of your pipes. That might lead to significant clogging issues.

Equal parts hot water and vinegar can be effective, especially if boiling water is added next. Down the drain, pour the liquids.
Although the vinegar is sufficiently acidic to dissolve the grease, it won’t damage your pipes the way a powerful drain cleaner might.
OVERFLOWING WITH BIGGER OBJECTS Large things could fall down the drain and get stuck, clogging it. It’s possible that nothing has gotten trapped at all.

It might be something straightforward, like the cap of a shampoo bottle or a razor. Perhaps it’s a small child’s toy that wasn’t found during bath time.

You might be able to unscrew your drain and fish the obstruction out, depending on how deep it is.

AUTOMATIC BACKUP There are certain telltale symptoms that something is awry if you are linked to a septic tank rather than a public water supply. One of them is the slow drain.

When there isn’t a clog, the problem is frequently caused by delayed septic drainage.

This may not always be an indication of disaster. For instance, if the ground is soggy from a recent rain then your system may have trouble draining the pipes.

If that’s the case, the problem ought to go gone after it dries.

In addition, if you put too much water through the septic system at once, it can back up. Your system might just not be equipped to get rid of all that water at once if someone else is taking a shower, someone else is doing the dishes, and many loads of laundry are being successfully completed.

There is rarely a problem with intermittent septic backup. But if the issue persists or keeps happening, you might wish to have your system checked out.

COMMON METHODS FOR UNCLOGGING A DRAIN Using a plunger, a plastic drain snake, or boiling water are some of the most popular do-it-yourself methods for unclogging a drain.

For cleaning drains, there are powerful chemical cleaners that are offered, but you shouldn’t use these because they could significantly harm your pipes by corroding them.

What should you do if the bathtub is still not draining? It’s time to call a plumber if you’ve tried everything to clear a clog or fix a septic backup but the bathtub still won’t drain.

A plumber will be able to identify the root of the problem and inform you of its seriousness. They’ll also have more powerful instruments at their disposal to attack a potential obstruction.

Additionally, you must have your plumber check at any pipes that have been harmed by hard water.

CONCLUSION A bathtub may not drain for a variety of reasons. The majority are due to blocked pipes, however a septic system backup might also be to blame for this problem.

In damp conditions or while carrying heavy loads, septic systems can drain slowly.

Simple solutions like vinegar, boiling water, and a plastic drain snake might be helpful. If the clog is near the surface, you can even detach your drain and look inside to check.

However, if you’re still having issues after performing all of this, seek assistance from a plumber.

RELATED POSTS

WRITE A COMMENT

FIND US

Newsletter

Enter your email address below to

subscribe to my newsletter