Why Would The Drain Flange Need To Be Removed? 2 How Can You Remove The Bottom Of A Bathroom Sink Flange? Conclusion Numerous homeowners find plumbing jobs to be intimidating when it comes to do-it-yourself projects around the house.
The majority of plumbing tasks, nevertheless, can be completed by a beginner. All you require are the appropriate equipment and instructions.
Sometimes the drains in bathroom sinks fail. A bathroom sink may leak, its flange may split, or it may become rusted.
We’ll give you a step-by-step tutorial in this post on how to take out a bathroom sink drain flange without hiring a pro.
WHY WOULD IT BE NEEDED TO REMOVE THE DRAIN FLANGE?
Look inside your bathroom sink and you’ll see a flat, circular, likely metallic piece of material in the center. The flange is as shown. or at least the top of it.
Connecting the sink basin to the drain pipe below is accomplished by the bottom of the flange dropping into the drain.
The flange from the bathroom sink drain may need to be removed for a number of reasons by a homeowner.
A water-tight connection is made when the flange is placed correctly and sealed with plumbers putty. However, a leak could be brought on by poor installation or aging damage.
You must remove the flange, reseal it, or replace it if your bathroom drain leaks or the flange is fractured or damaged.
Perhaps you’re planning to replace your sink basin as part of a home repair project. If so, in order to finish the project, you must remove the drain flange.
If your bathroom faucet needs to be replaced, you might also need to remove the drain flange from the bathroom sink. Many new flanges that match the faucet are included with the faucet.
You should have the following items on hand in order to remove a sink drain flange.
Two pairs of channel lock pliers are required for the task, though other pliers may be used in a pinch.
Any hardware store or big-box retailer with a hardware section should carry plumbers putty.
Flathead screwdrivers are recommended.
You’ll need an empty bucket to collect any liquid that remains in the p-trap.
HOW DO YOU TAKE A BATHROOM SINK FLANGE OFF AT THE BOTTOM?
Setting up your workspace is the first thing you must do. In order to have space to work, make sure everything is taken out of the cupboard beneath the bathroom sink.
Start by removing the sink’s drain stopper. The removal of a pop-up drain is as easy as twisting and pulling.
However, you’ll need to unplug the stopper from the faucet if it’s attached to a lever at the back of the fixture. Make sure the lever is pushed all the way down and the stopper is in the up position.
Squeezing the clip holding the pull rod and plunger rod together will allow you to remove this type of drain stopper. The plunger rod can now be removed by unscrewing the nut on the drain pipe’s back.
By doing this, you may easily remove the drain stopper at the top with your hands.
Make sure the water supply is shut off after removing the drain stopper. You should be able to locate the water valve that directs the water supply to the sink in the rear of the cabinet.
Make sure to thoroughly close this valve.
Using a pair of pliers, detach the p-trap from the tailpiece and place your bucket underneath it to catch any water.
You can release the drain assembly by unscrewing a lock nut that is located close to the bottom of the sink. To remove the nut and plastic washer, just use pliers.
Break the rubber gasket’s seal closest to the sink basin using a flat head screwdriver.
Push up on the drain assembly to release the flange once the nut, washer, and rubber gasket have been eliminated. Pull up on the flange and down on the old drain to remove them both while holding the drain assembly in one hand and the flange in the other.
If the sink drain flange is too tight to remove easily, you might need to tap the drain assembly’s bottom with your pliers to make it more pliable.
Once the bathroom sink drain flange has been properly removed, clean the drain hole to get rid of any silicone caulk or plumbers putty that may have been used to seal the flange. A product that will assist in removing any lingering residue is penetrating oil.
You are now prepared to swap out the old flange for a new one by simply performing the previous procedures backwards. For a tight seal, make sure to use plumbers putty to seal the new drain flange.
CONCLUSION There is no need to hire a professional for this straightforward task, despite the fact that these straightforward actions may seem scary to a homeowner. You’ve now acquired two new skills, and you can remove the flange from the kitchen sink drain by using the identical procedures.
Use these methods to feel confident in your DIY project skills, whether you need to remove the bathroom sink drain flange due to a clog or the installation of a new faucet.
