1 How To Use A Plunger? 2 How Does A Plunger Work? 3 Choosing The Right Plunger 4 Parts Of A Plunger 5 Where Can You Use A Plunger? What To Do When Plungers Fail Hot Water andamp; Soap Vinegar andamp; Baking Soda Use A Toilet Snake 1 How To Use A Plunger? 0 1 How To Use A Plunger? 1 Most people have at some point observed a plunger hidden behind a toilet or tucked beneath a bathroom sink. Consider yourself fortunate if you have never been in a situation where using such a tool was necessary.

However, suffice it to say that very few people will go their entire lives without ever needing a plunger’s assistance.

In any case, it’s wise to become familiar with the fundamentals of using a plunger lest you find yourself in trouble should a clog happen. You won’t need to fear a clogged drain as much if you have some knowledge and the proper plunger for the job.

The following is a thorough explanation of plunger usage and choosing. When put to use, the advice in this article may, in some situations, prevent you from making an expensive call to a plumber.


Even though one would be tempted to think that using a plunger is a fairly simple process, there are a few essential procedures that one must follow in order to get the greatest results. Neglecting the significance of these phases will frequently put you in the same situation you were in before.

To clear even the most difficult of toilet clogs, follow these procedures.

Pick The Right Plunger: You can choose from a variety of plunger kinds, which may surprise you (more on that in a minute). However, a good flange-style plunger is indispensable when trying to unclog a clogged toilet. Allow Water Level To Settle: In most circumstances, a newly clogged toilet’s water level will rise to, or even pass, the lip of the bowl. With this much extra water present, diving becomes almost impossible due to the possibility of water overflow. As a result, one should wait about 7 to 10 minutes before starting their plunge. As a result, the water in the toilet bowl can drain to usable levels. The water within the toilet bowl should ideally be about half as deep as the toilet bowl itself. Align Plunger With Drain: At this point, you’ll line up the plunger’s cup with the bowl’s bottom drain. This drain’s flange ought to be properly engaged by the plunger, resulting in a tight seal. The plunger’s cup should be buried beneath the water’s surface when positioned in this way. Push/Pull Plunger: Once everything is in place, for a period of 20 to 30 seconds, you will alternately push and pull firmly on the plunger’s handle. Each action should be forceful and well-planned since it increases the likelihood of success. Verify Your Success: Remove the plunger from the toilet bowl after 20 to 30 seconds to break the seal that has been formed. When you have properly removed the obstruction in issue, you will typically hear a gurgling sound overhead. Perform Flush Check: A flush check should be carried out when it seems that the clog has been cleared. This entails flushing the troubled toilet while keeping an eye out for an overflow. If the water level in the toilets starts to rise again, swiftly turn the water supply shutoff valve that is positioned along the rear wall, then flush the toilets once again. However, no additional repair will be needed if the toilet flushes as expected. WHAT WORKS IN A PLUNGER?

You can thank physics if you’ve ever used a plunger to clear a clog in your toilet. A plunger works on the fundamental ideas of pressure and suction, employing both in a way that makes it simple to remove obstacles from pipes.

Pressure is applied into a clogged pipe when you press downward on a plunger’s handle. The airtight barrier made between a plunger’s cup and the toilet bowl below prevents this pressure from escaping.

As a result, any pressure generated is applied immediately to a pipe obstacle.

Similar to this, pulling upward on a plunger’s handle produces a strong suction that raises the water’s level below the obstruction in the pipe. This frequently removes a blockage, enabling the plunger to force it lower with the subsequent stroke.

SELECTION OF THE CORRECT PLUNGER Contrary to popular belief, users can choose between a number of different plunger kinds. When choosing the ideal model for your unique needs, it pays to be aware of the distinctions between each of these plunger kinds.

The Common Plunger Standard plungers, often referred to as sink plungers, are made to be used on flat surfaces, like those that are found next to kitchen sinks or shower drains. The use of these plungers on toilets, however, is futile. Bathroom Sprung A flange plunger, also referred to as a toilet plunger, is made to be used on a variety of drains. A toilet plunger, on the other hand, has a flanged lip that improves the seal for recessed toilet drains, hence this style of plunger is typically used to unclog toilets. Plunger Accordion Hard plastic accordion plungers are made specifically for use on toilets. These plungers can produce a lot of suction and pressure, but they might be a little challenging to use. ASSEMBLY OF A PLUNGER 1. Control A plunger handle is often made of wood and serves as a point of grip for customers. 2. Cup A plunger’s cup often has a bell shape, which enables the compression needed to produce both pressure and suction. This cup is typically constructed of rubber. Flange 3. The outermost border of the unit’s cup is formed by the plunger’s flange in the ring-shaped seal. While a plunger is in use, this flange avoids loss of suction or pressure. WHERE CAN A PLUNGER BE USED? Toilet plungers are frequently quite successful at clearing blocked toilets. The best way to do this is with a toilet/flange plunger. Sink A basic plunger can usually be used to quickly clear a clogged sink. However, by simply folding the plunger’s flap upward into its cup, a toilet/flange plunger can likewise be utilized for such tasks. Shower Shower drains can be unclogged similarly to sink drains by using a conventional plunger or a toilet/flange plunger. Both of these plunger kinds will offer enough suction and pressure to remove clogs. WHAT TO DO IF Plungers Don’t Work Even though toilet plungers are usually very effective in unclogging the vast majority of obstructions, sometimes additional steps are required. When attempting to unclog a toilet that has not responded to the use of a plunger, consider one or more of the following tips before panicking or calling a plumber.


Common household dish soap and hot water are frequently all that are required to unclog a toilet. Put a saucepan of water on the stove and heat it to just below simmering to accomplish this.

Make sure the toilet bowl is just partially filled with water in the interim. Manual removal will be required if more water is present.
Once you’ve taken care of this, you’ll add some dish soap to the toilet bowl itself.

Pour the heated dish soap into the toilet bowl and stir it around to combine with the already-added soap. Prior to attempting to flush your toilet, let this soapy water sit for five minutes.


Most people are aware that mixing vinegar and baking soda causes very strong reactions. But did you know that this reaction frequently works well to unclog a toilet?

As absurd as it may sound, clearing a blockage in a toilet bowl by adding vinegar and baking soda is actually rather common. This DIY mixture frequently performs better than many commercial drain cleaners, in fact.

Pour one cup of baking soda and one cup of vinegar into the damaged toilet bowl to finish the procedure. You should observe a prompt response occurring.

After letting this mixture sit for 20 to 30 minutes, flush the toilet with 1 gallon of warm water. This will typically be sufficient to remove the problematic impediment.


In some situations, you will need to use manual labor to unclog a clogged toilet. The use of a pipe or drain snake is frequently required for this.

This kind of device can be installed into the pipe underneath a toilet’s drain opening. The problematic blockage can then be removed by moving the drain snake back and forth.

Although it can be alluring, it is not advisable to make your own snake drain out of a metal coat hanger. A metal coat hanger is quite likely to chip or otherwise harm the porcelain surface of a toilet.

A coat-hanger is also very unlikely to make the necessary bend to pass through the P-shaped bend in a toilet’s pipework.
PLUNGER CLEANUP SUGGESTIONS The use of a plunger frequently prompts a new issue that needs to be resolved. How exactly should a plunger be cleaned?
This can be a real conundrum, and one rarely thinks about it until one is left standing with a plunger in hand.

Fortunately, cleaning a plunger is much easier than one may imagine. On the contrary, with only common home items and a few minutes, a plunger may be cleaned quite hygienically.

You can easily clean your plunger by following these 3 easy steps.

Add Liquid Bleach To Toilet: Fill your toilet bowl with 3–4 cups of liquid chlorine bleach to start. Rinse Plunger in Bleach Solution: Insert the rubber cup of your plunger into the toilet bowl and swirl it around.

To rinse, flush the toilet while keeping the plunger’s cup in position. Any remaining bleach residue on your plunger should be rinsed away with clean water. FEW FINAL THOUGHTS ON USING A PLUNGER The genuine worth of a high-quality plunger in a family home is sometimes overlooked. This instrument can potentially avoid expensive, frequently unneeded calls to the plumber while also reducing hassles.

This doesn’t really matter, though, if you don’t know how to plunge a toilet when the situation calls for it.

By following the above instructions, you will be better prepared to handle even the most difficult clogs and gain control over your plumbing problems. Unclogging the occasional toilet is a vital aspect of homeownership, although being frequently unpleasant.

By approaching this task correctly, difficulty can be avoided and your plumbing can be repaired quickly.





Enter your email address below to

subscribe to my newsletter