1 What Is The Standard Bathroom Drain Size? Are There Different Size Bathtub Drains? 2 How Is Bathtub Drain Diameter Measured? 3 How Long Is The Bathtub Drain? 4 How Do You Choose A Bathtub Drain? 5 Conclusion You might be concerned about having the proper piping if you’re constructing a new bathtub. You don’t have to be, though.

The drain setup may appear difficult, but it is actually rather simple. There aren’t many different parts, and the usual size of the drains is 1.5 inches.

These are some of the most crucial details concerning the configuration and size of your bathroom drain that you should be aware of.

WHAT IS THE AVERAGE SIZE OF A BATHROOM DRAIN? The drain on a bathtub will be 1.5 inches in diameter. Sink drain sizes might vary significantly, but 1.25 inches is the most typical value.

Additionally, sinks with 1.625-inch drain diameters are available.
Because of the standardization, any bathtub drain that is between 14 and 26 inches in depth can fit any conventional bathtub.
The drain’s size is standardized because it must accommodate the P-trap, the drain’s following component. The normal size of this aperture is 1.5 inches.
However, because the length of P-traps varies, it’s crucial to choose the proper one for your plumbing.

DO BATHTUB DRAINS COME IN DIFFERENT SIZE RANGES? Regardless of the tub you use, the company you use, or the nation you are in, standard bathtub drains never change. This makes it much simpler to assemble the plumbing parts and to repair any broken ones.

Some extremely ancient or unusual bathtubs may not have a standard-sized drain. It would be a major inconvenience, but this is the exception rather than the rule.

Shower stalls’ variously sized drains are one thing to keep in mind. These have a total diameter of 3.25 inches, which is more than twice as large.

Additionally, they are wider than the 2 inch diameter P-trap hole on a shower drain.

How is the diameter of a bathtub measured? The size of the hole at its widest point is used to calculate the drain’s diameter. The hole measures 1.5 inches from one edge to the other.

IS THE BATHTUB DRAIN LONG ENOUGH? Usually, when you inquire about the length of a bathtub drain, you mean the length of the P-trap. It has a typical diameter of 1.5 inches and joins to the drain aperture.

It does not, however, have a set length.

Because P-traps are curved, it is challenging to change their proportions. As a result, before you start, it’s crucial to know what size you’re looking for.

The P-trap space measurement is challenging because of the curved bent. Each length at the bend needs to be measured.
The P-trap will be installed to the drain pipe, after which the water will be routed through the remainder of your plumbing.

Finding the proper hole for your tub doesn’t need to be a major concern because bathtub drains come in a common size. However, you may need to consider how certain elements, such as the drain pipe and P-trap, will fit with the rest of your plumbing.

After putting dimensions aside, the drain’s design should be taken into account. To prevent your bathtub from filling up too much, you should also think about getting an overflow drain.

Your bathtub drain selections may be governed by the building codes in your city or state. The size of parts like the P-trap and the drain pipe may be subject to regulations.

There can be specifications for your overflow drain as well.
CONCLUSION It should not be difficult to determine the proper bathtub drain size. A 1.5 inch drain is integrated into every basic bathtub.
It’s possible that an old tub you find has a little different measurement, although this is a rare occurrence.
Standardization of the drains makes it simple for them to attach to the P-trap. Your sink has different-sized drains.
Additionally, a shower stall drain will be more than twice as wide as a bathtub drain if you opt to install one.





Enter your email address below to

subscribe to my newsletter