Flush Check your other taps Use Water Softeners Use Chlorine Check your well Check your toilet Check for hard minerals 1 Final Thoughts It can be a horror to see brown water in toilet bowls, especially if you don’t know where it originated from. The brown color could be caused by a number of factors.
Some of these may be remedied at yourself, but there are some that require calling a plumber.
Investigating the cause is the first step in answering the question “Why is my toilet water brown?” Brown water is sometimes a result of corroded pipes.
These corroded pipes allow mineral deposits to enter your toilet tank through the water supply.
The methods you should follow to solve the issue are shown below.
CLEAR
Sometimes a brownish tint might be explained by something as basic as the toilet not completely cleaning the toilet bowl of organic materials. So flushing should be your first action.
The pipes may be obstructed if the toilet backs up or drains slowly. From there, discolouration may result if the obstruction is spilling waste back into the toilet water.
You should clean the toilet bowl and unclog the drain. However, the issue shouldn’t continue.
However, if more brown water starts to pour out of the toilet tank, you most likely have a more significant problem.
VERIFY YOUR OTHER PAGES Checking for corroded pipes can be done in a fairly straightforward manner. All the faucets in your kitchen and bathrooms should be turned on. Watch the hot and cold water flow.
Your iron pipes are probably to blame if all of your water is brown. Older homes’ iron plumbing systems are particularly vulnerable to corrosion.
You could notice that the tap water tastes like pennies before the iron supply gets dense enough to cause the water to become discolored. After using the washing machine, some people also discover rust spots on their clothing.
You’ll regrettably need to contact a plumber. They might advise switching to PVC water pipes for the complete system.
For a homeowner, this is an expensive purchase, but it’s essential if you want to prevent iron bacteria from possibly proliferating in your pipes.
USE WASHING SUBSTANCES In addition to calling a plumber, you need a temporary fix if your water is iron-rich.
A sort of chemical addition known as a water softener can eliminate bacteria and iron from the water supply. It’s crucial to understand that hard water cannot entirely be removed from a rust buildup.
However, a water softener from Amazon can significantly raise the quality of your water.
APPLY CHLORINE Chlorine is frequently used in swimming pools for a purpose. It eradicates bacteria with extraordinary efficiency.
Chlorine is a chemical that oxidizes iron and kills bacteria when it is added to a system. When there are problems with their home or city piping, many people utilize this to filter their water.
VERIFY YOUR WELL Only 15% of Americans rely exclusively on well water. But if that describes you, you ought to examine your well.
Sediment may get into the water supply occasionally if the well sustains damage. If, for instance, an animal fell into the water and drowned, there may also be organic material in the water.
Low water pressure and reduced water flow could be brought on by a significant obstruction in the well. You should have a professional look it over as soon as possible if you have decreased water pressure and mysteriously brown water.
Verify your bathroom
You may have eliminated organic waste, but your other taps may still be functioning normally. And yet the brown water still appears after flushing the toilet.
This indicates that the issue is limited to your toilet or the piping nearby.
Your toilet could occasionally have a different water supply than the other faucets. Or perhaps the only rusty component is the waterline going to the toilet tank.
It’s possible that the toilet’s inside components have rusted as well. Check inside the tank to check if there are any parts that are plainly rusted.
If not, the water supply pipe or supply pipe for the toilet are most likely where the rust is.
VERIFY ANY HARD MINERALS There is extremely little possibility that your system is rusty if you have PVC pipes. However, if your sewer plumbing is blocked with hard minerals, your water may also turn brown.
When exposed to oxygen, substances like calcium and manganese turn brown.
Hard water is typically a result of using chemical cleansers. These accumulate in the pipes after being flushed down the drain.
These mineral buildups start obstructing water over time. Water then overflows into the actual toilet bowl.
Your toilet and pipes may deteriorate significantly more quickly if you use hard water. Additionally, layers of accumulation may result.
The rough surface can “catch” other things when it adheres to the pipes, increasing the likelihood that your toilet will become clogged.
You can occasionally clean the toilet tank to get rid of calcium buildup. However, if the obstruction is in the pipes themselves, you’ll likely require a plumber.
LAST THOUGHTS Even while brown toilet water is not necessarily an emergency, it can be very annoying. Rust, biological waste, hard minerals, and other potential sources should all be ruled out.
Hire a plumber to determine the cause of your toilet’s brown water if you can’t identify and resolve the issue yourself.
