1 1. Use Your Brush 2 2. Use Your Plunger 3 3. Use A Hanger 4 4. Try Vinegar and Baking Soda 5 5. Use Boiling Water 6 6. Use Coca-cola 7 7. Use An Auger 8 8. Call A Plumber Nothing is more annoying than trying to clean excrement out of a toilet bowl. Most of the time, you can fix the problem yourself before calling a plumber.

On a clearly clogged toilet, you can still use a plunger, and cleaning up afterward is made easier by a toilet brush.

These are some of the simple solutions for toilet blockages that you can try. As you assault the obstruction, make sure you are wearing rubber gloves to protect yourself.

If you’re concerned that the water level might overflow, lay plastic wrap on the floor.
Use your brush, first

The purpose of the toilet brush is to remove stains and other debris from the toilet bowl. Use your brush to loosen and break up the clog if it isn’t too far down the toilet drain.

Next, try flushing the toilet once more.
If dissolving the substance is unsuccessful, a more serious blockage deeper in the pipes may exist.
2. Plunge with your plunger

The plunger is the tool of choice for unclogging obstructions. Most clogs only require this level of care.

Simply place the plunger over the drain and hold it there until a vacuum seal forms. Because they are made precisely to fit the curve of the drain, flange models are preferable for toilets.

A trash bag should always be close by in case any waste sticks to the plunger. In case of splashing, you might also think about covering the toilet’s walls and floor with plastic foil.

Once the seal is in place, forcefully push up and down numerous times. As a result, the clog will be forced to come loose due to suction.

You may need to repeat this anywhere from three to fifteen times, depending on how serious the clog is.

After that, flush the toilet to see if the obstruction is cleared. The procedure might need to be repeated several times. It’s time to move on to the subsequent steps if it doesn’t work.

Utilize a hanger


Most likely, you have a metal wire-based clothes hanger in your wardrobe. As long as the obstruction is not too deep in the pipes, you can use this as a homemade toilet auger.

Use pliers to uncoil the wire. Then, bend the end until a hook forms.
Feed the wire through the hook as you push it down the drain until you reach the obstruction. Push onward until the pressure subsides.

You can remove the hanger and flush the toilet once the drain feels clear. Any hair or toilet paper stuck in the pipes that won’t disintegrate should be caught by the hook.

4. Test baking soda and vinegar.

This time-tested method is very popular for clearing clogged toilets. Compared to bleach or other industrial chemicals, it is significantly better for your pipes.
You should first run some baking soda via the drain. You will then add a cup of vinegar.
A chemical reaction will result from this, clearing accumulated waste from the pipes.
The optimum time to do this is after you’ve partially flushed the toilet after clearing enough of the obstruction.
5. Make use of hot water

Whether your drains are clogged in your sink, bathtub, shower, or toilet, a common solution is to use hot water.
On the stove, put a gallon of water to boil. In order to prevent any harm, let it cool until the water is warm.
After that, you can flush it down the toilet. Dissolving and removing some of the obstruction may be helpful.
Dish soap is sometimes suggested as an addition to the mixture.

After the vinegar and baking soda have worked in the pipes for around 30 minutes, another alternative is to pour hot water into the toilet bowl.

Utilize Coca-Cola


Although it may seem like a strange solution for a clogged toilet, some people swear by Coca-cola! All you need is some plastic wrap and half a liter of the beverage.

Fill the bowl with the soda. After that, raise the toilet seat and completely enclose the toilet bowl with foil.
After an hour, leave the bathroom. The pressurization of the toilet will be brought on by the soda and plastic combination.
As a result of the increased flush strength, the clog will be considerably easier to remove. Before removing the plastic, be careful to flush.

The same idea applies to an auger as it does to a wire hanger. But it is a robust, expert plumbing instrument.

In essence, a wire will be wound through your pipes until it hits the obstruction. The wire can reach considerably deeper than a coat hanger since it is flexible.

The blockage will be divided into manageable bits so that it can be flushed. The auger can grab and remove non-flushable items if your toilet is clogged by them.

Rubber is used to protect toilet augers so they won’t harm your pipes or toilet. They are available from hardware stores or on Amazon.

Call a plumber if none of these fixes resolve the issue. Even if the price could be high, you must determine what is wrong with your pipes.

And you need your bathroom to work properly once more!
You might be tempted to use harsh substances like Drano or home bleach. However, neither of them is a wise choice.
Bleach won’t dissolve the obstruction-causing substances, and using too much of it can harm your pipes.
Drano is designed for sinks rather than toilets and is far too abrasive for your plumbing system.

Your plunger and brush will usually be sufficient to save you. The situation won’t be as nasty as you worried about as long as you take the right care to keep your hands and washroom clean.





Enter your email address below to

subscribe to my newsletter