We’ve all experienced this: You flush the toilet, but instead of hearing a loud noise, the water simply begins to stream. When you open the lid, you see that the bowl is full with water and that nothing is draining.

What would you do in such a circumstance? And what if you’ve tried everything fundamental yet still experienced failure?
First of all, keep your cool. There are numerous approaches of clearing toilet obstructions.
And if you discover that no do-it-yourself fixes work, call in the pros.

These are some of the first techniques you should try if your toilet simply won’t flush. 9 WAYS TO UNCLOG A TOILET WHEN NOTHING ELSE WORKS Most of the time, employing these instruments and solutions will help clear a clog.

When the problem becomes more serious, a plumber should be called in.
1. APPLY A PLUNGER

One of the most practical things to have around the house is a plunger. It’s a smart idea to keep two plungers in your bathroom—one for the sink and shower and one for the toilet.

You won’t have to use the same instrument in the shower and the toilet.
Some toilet plungers have unique designs that enable them to fit the drain more readily. They obtain a better seal in this manner.
Long-term toilet unclogging may be facilitated by purchasing a flange plunger.
To prevent toilet water from splashing over your hands as you work, put on some rubber gloves before you begin.
Put the plunger in the toilet bowl after picking it up. Place it over the drain and press down until it is completely shut.
The vacuum produced by this airtight seal will help to remove the obstruction.
Slowly apply greater pressure as you descend on the plunger. Then completely remove it.

Try flushing the toilet after doing this two or three times. The push-pull suction should remove the obstruction and facilitate the contents’ passage via the drain.

Most individuals attempt using plungers as their first line of defense when their toilet is clogged. Therefore, you might need to try a different approach if you’ve already tried this and it didn’t work.

Another thing to bear in mind is that the type of obstruction may affect the best option for you. Some of these techniques, for instance, are ineffective for dealing with clogs caused by hair or non-biodegradable objects flushed down the toilet.

2. MAKE USE OF A PLUMBING SNAKE

A plumbing snake can be the next most effective method to remove the clog when the plunger has failed. This is especially useful for clogs in pipes that are fairly deep and may be challenging to remove with a plunger.

A snake, though, is a rather robust tool. Because of this, some individuals might favor attempting the alternative techniques first.

Like owning a plunger, owning a plumbing snake is a good idea. It’s unlikely that you’ll need it frequently, but when you do, it could save your life.

Flexible wiring known as “plumber’s snakes” can be placed into a drain to unclog it. You can frequently utilize them in your bathtub, shower, or sink in addition to the toilet.

The wire’s flexibility allows it to thread far into the pipes before hitting the obstruction. Every piping bend and curve will be wound around by it.

The porcelain of your toilet, sink, or bathtub can be protected by the rubber fitting found on the majority of plumbing snakes. This should unquestionably be your next action after using the plunger if you are aware that you need to reach deep into your drain.

To avoid getting splashed with toilet water or other trash, you should wear rubber gloves when using the plunger.
The snake is easy to use. Just insert one end into the toilet.

To feed the wire deeper into the pipe, you may need to press it or spin a crank, depending on the model. The snake should be pushed downward until it encounters resistance.

The clog is this.
It needs a little more pressure, so twist it. This will clog the drain by catching the wire’s end on the obstruction.
Up until there is no longer any resistance, keep pushing and clearing the obstruction.
You can flush the toilet at that point to test the water flow.
When the obstruction is gone, the water should flow freely. Instead, if you’re experiencing sluggish and slow motion, you haven’t yet fully cleared the clog.
You’ll have to reapply the snake.
3.

USE A WIRE COAT HANGER
You might not have the time or resources to buy a plumber’s snake. If so, this DIY alternative is less expensive and may be appealing.
The closets of many people already include wire coat hangers.
Take the one you’re not using. You should now have a lengthy, flexible piece of wire after unwrapping the wiring.

Similar to a snake used by do-it-yourself plumbers. If you know the clog is only a few inches into the drain, it works quite effectively even if it can’t reach as deep as a real plumbing snake.

Remember that your coat hanger wire won’t be long enough to remove the blockage if it is further in your pipes.

With order to prevent the wire from scratching your porcelain once you have unwrapped it, you should wrap one end of it in an old washcloth. Make sure you achieve a good seal with the duct tape as you fasten the washcloth to the wire.

The fabric-covered end can then be inserted into the basin. Slowly twist the end as you push it into your drain.
The wire will be used similarly to a plumbing snake to break up the clog until there is no longer any resistance.
Push on despite the opposition. Wait until you see that the water in the toilet is starting to drain correctly before stopping.

You can then flush the toilet at that moment. If the water is draining slowly, you should repeat the procedure, just like with the drain snake.

However, this approach will only work if the obstruction is not too deep in the pipes. A genuine drain snake is much longer than a wire coat hanger.

4. Use a vinegar and baking soda mixture

If you have problems clearing a clog, you might be tempted to use strong chemical cleaners. However, the majority of these items won’t work very well, and they can also severely damage your pipes.

However, one of the most effective ways to clean your pipes is with a vinegar and baking soda mixture. Furthermore, chances are strong that you already have both of these ingredients in your cupboard.

Bring out the baking soda, vinegar, a container, and several cups. You won’t be mixing the ingredients before flushing them down the toilet, which is a crucial point to remember.

These components combine to form a washing foam that can completely wreck your bathroom!

In your container, combine one cup of baking soda with two cups of water. Although there won’t be a chemical result, doing this will make it simpler to spread the baking soda throughout the pipes.

Fill your toilet with the baking soda and water mixture.
Next, dispense two glasses of vinegar. After adding the baking soda, add these to the toilet.
For at least 20 to 30 minutes, you should give the solution time to work. This enables the vinegar to enter the pipes more deeply.
The obstructed materials should become looser as a result of the chemical reaction, making it simpler to flush the toilet.

When using a plunger to clear a clogged toilet, this is frequently the first action people perform. If you notice bubbles at the drain’s mouth, the solution is operating as intended.

5. USE A SUCTION CUP Did you know that some suction cups are made with toilet-clog removal in mind? A suction cup might work if your plunger didn’t.

In some circumstances, especially if the plunger is not flanged, you might be unable to achieve a tight enough seal with a plunger.
For drain obstructions, suction cups are available to buy. These are designed to remove tiny blockages.
They typically have a lengthy handle that resembles a plunger.
The suction cups are almost as easy to use as a plunger. Place the cup in the toilet bowl’s drainhole.
Make sure the vacuum is airtight and that it seals.

Using the handle in the same manner as a plunger, lower and raise the suction cup at this point. This can assist in clearing your drain of little non-biodegradable particles.

Just keep in mind that a suction cup is unlikely to function if your plunger had a proper seal and did not.
6. Utilize an enzyme

Is the amount of solid waste in your toilet your main issue? Products made with enzymes are intended to liquefy such waste.
They greatly simplify using your plunger to clear the remaining blockage or flushing the toilet.
Both hardware and supermarket stores carry enzyme products. They often have the purpose of liquifying septic tank contents.

One thing to keep in mind is that this approach only works on organic garbage. The garbage won’t be affected by the enzyme product if it isn’t organic or biodegradable.

Make sure to adhere to all of the product’s written directions. These products are typically easy to use.
You merely add the necessary quantity to the toilet bowl, occasionally after diluting it with water. Next, you wait for it to function.
You should flush the toilet once some time has passed. You can determine if the clog has been appropriately broken down based on this.
7. USE BOILING WATER AND SOAP

The ease of this solution may surprise you. But occasionally, it actually does work! Dish soap and hot water are a terrific mix.
On the stove, start by bringing several quarts of water to a boil.
After that, add some dish soap to the water in the toilet. Ten minutes after waiting, flush.
This will make it possible for the solution to penetrate the pipes further and clear more of the clog.

Because of how affordable this option is, people like it. This technique frequently works to soften the obstruction long enough for you to successfully plunge the toilet.

Or it might unclog the drain all by itself!
8.

USE A SHOP VACUUM

To try to unclog the toilet, you can actually use a Shop-Vac or another wet and dry vacuum. But remember, you shouldn’t use your standard household vacuum for this.

It’s crucial that you’re use a water-friendly instrument.
Utilizing the wet vac, drain the toilet bowl first. Then, to prevent the hose from chipping the porcelain, cover it with a washcloth.
Similar to how you would use a plunger, place it against the drain. Push firmly until the seal is as airtight as possible.
You can then start the suction at that point. You might hear it unclog as it happens.

If you believe the blockage has been released, you should stop using the vacuum and check to see if the toilet is able to drain. Repeat the procedure until the obstruction has been effectively removed.

If you wish to use your Shop-Vac elsewhere, this procedure might be a little unhygienic. The hose that was in the toilet bowl has to be sanitized.

However, it frequently provides more power than a plunger does.
You might alternate using a plumbing snake and a vacuum to break up the bulk for very obstinate jams.
9. PHONE A PLUMBING

It would be extremely uncommon for any of the eight prior solutions to fail. It’s time to call a plumber, though, if you’ve done everything and are still having trouble.

It’s unlikely that other methods, such utilizing potent chemical drain cleaners, will be effective. They’ll only damage your pipes, too.

If you’ve tried every tip on this list and the toilet is still clogged, there may be a more serious plumbing problem. An expert can identify the problem’s root cause.

They can also look for problems with your plumbing, such as leaks and rust.

It’s possible that some people won’t be able to test all eight of these suggestions. You might not have a plumbing snake or a Shop-Vac, for instance.

It is a good idea to call a plumber if you have exhausted all reasonable options.
Working with a plumber is preferable to exhausting yourself with DIY fixes, especially if you don’t know what’s causing the clog.
CAN A TOILET SELF-CLEAN? In some cases, toilets will clear themselves.

For instance, you might find out in the middle of the night that your toilet is clogged. However, the clog easily goes away the next morning when you flush it.

When is it advantageous to hold off in the hopes that the blockage would clear itself? Sometimes you just don’t want to use a plunger or deal with hot water.

The toilet will unclog itself if it becomes blocked with toilet paper, human waste, or other biodegradable materials. It can unclog itself in an hour or take longer than 24 hours, depending on the situation.

You don’t want your toilet to be inoperable for longer than a day! However, you might want to wait a few hours if you’re having difficulties using a plunger to clear the obstruction.

The obstruction should have improved somewhat by the time you return. This will make using a plunger to remove it simpler.

A clogged toilet can be unpleasant to clear, especially when it seems like nothing is working. A clogged toilet can be unclogged in a variety of ways. . and numerous things you ought to never do.

Bleach and other strong chemicals, for instance, are more likely to cause harm than help.

It’s time to call a plumber if you’ve tried everything else possible, including using a plunger, over-the-counter treatments, and a plumber’s snake. Your pipe may have a problem that can only be identified and resolved by a professional.